Licences and documents

Our mining licence, company registration documents, test report and vessel documents are compiled for due diligence. Click a card below to open the original PDF. Specific terms are provided per project.

Mining licence details

Licence No.ХАБ 027297 ТЭ
HolderООО «Разработка полезных материалов» (INN 2700029070)
Issued byMinistry of Natural Resources of Khabarovsk Krai
State registration12 September 2024
Valid until31 December 2044 (20 years)
PlotLichansky (участок недр «Личанский»), Nikolayevsky District
Plot area0.88 km²
Reserves, category C11.535 million m³
Reserves, category C22.647 million m³
MineralConstruction sand (natural river sand)
Type of useExploration and extraction (разведка и добыча полезных ископаемых)

Note: the reserves above are calculated to a depth of about 6 m. The actual sand layer is about 15–20 m thick, and total resources of the three plots are expected to exceed 100 million t (company estimate).

Plots and licences

Our group holds three plots in the bed of the Amur in Nikolayevsky District. These are modern alluvial river-bed deposits under only about 0.2 m of silt, so sand is dredged directly, without stripping.

PlotLicenceReserves in the licence documents (upper horizon)Location and areaStatus
LichanskyХАБ 027297 ТЭ
exploration and extraction, valid until 31 December 2044
C1 1,535 + C2 2,647 = 4,182 thousand m³
(approved by expert commission protocol No. 29 of 18 October 2021)
Amur river bed opposite Nikolayevsk-on-Amur
approx. 53°07′N 140°38′E, 0.88 km²
Extraction licence in force
KakinskyХАБ 018165 ТП ※
geological study, valid until 20 September 2027
C1 2,595 + C2 10,107 ≈ 12,700 thousand m³
(calculated in the 2022 geological report)
Amur river bed 17 km south-west of Nikolayevsk-on-Amur
1.28 km²; deposit 2,415 m long and 199–800 m wide
Extraction licence being arranged
Third plot———Rights being formalised (expected in Q1 2027)

※ The Kakinsky licence is held by the group company ООО «Разработка полезных ископаемых» (INN 2721248611).
The licence documents count only the upper part (to a depth of about 6 m) of two plots. The actual sand layer is about 15–20 m thick, and total resources of the three plots are expected to exceed 100 million t (company estimate).

Other approvals

Quality control

The sand is washed by pumping it twice and drained at the stockyard before shipment; test data can be provided for every lot.

Test items

  • Grading (fineness modulus)
  • Silt and clay content
  • Chloride content
  • Density (oven-dry)
  • Water absorption

Standards

  • Complies with Russian national standard GOST 8736-2014
  • Meets the requirements for Class I sand
  • Passed Russian customs export inspection
  • Independent test to JIS A 5308: 16 items qualified (oven-dry density 2.58 g/cm³, water absorption 1.7%)
  • Maximum grain size: 5 mm or less

Documents available

The following documents can be provided for your due diligence or internal review:

Legal documents

  • Copy of the mining licence (with translation)
  • Company registration documents
  • Customs export documents
  • Water use permit

To request documents, please use the Contact page. We can sign an NDA if required.

How to verify us yourself

Before a first deal, checking your counterparty is essential. Everything about us can be checked using the numbers and sources below.